| Surface roughness | Rtmax | Ra |
| Sliding surface | ≤ 2 µm | 0.05–0.3 µm |
| Groove bottom | ≤ 6.3 µm | ≤ 1.6 µm |
| Groove side | ≤ 15 µm | ≤ 3 µm |
| Bearing area: 50-95% and 0.5 Rz cutting depth (based on Cref = 0%) | ||
| Recommended Size mm | ||||||||
| d/h11 | D/h11 | D/H8 | L/-0.1 | c | a | Rmax | ||
| ＞ | ≤ | ＞ | ≤ | |||||
| 10 | 66 | 10 | 33 | d + 12 | 7.0 | 3 | 1.25 | 0.4 |
| 66 | 110 | 33 | 55 | d + 15 | 9.0 | 3.5 | 1.5 | 0.4 |
| 110 | 280 | 55 | 140 | d + 20 | 10.0 | 5 | 2 | 0.4 |
| 280 | 400 | 140 | 200 | d + 25 | 12.5 | 6.5 | 2.5 | 0.8 |
| 400 | 600 | 200 | 400 | d + 30 | 15.0 | 7.5 | 3 | 0.8 |
| 400 | 600 | d + 40 | 20.0 | 9 | 3.5 | 0.8 | ||
| Operating parameters | ||||||
| Material | Temperature | Speed | Pressure | |||
| Sealing components | Elastomer | Retaining ring | Minimum °C | Maximum °C | Maximum m/s | Maximum bar (MPa) |
 PTFE v |
NBR70 | 1.4310 | -30 | +100 | 10 | 15 (1.5) |
 PTFE g |
||||||
 PTFE b |
FPM/FKM | -20 | +200 | |||
 PTFE c |
||||||
| Ordering example | |
| Introduction | Rotary seal TR01-F |
| d x D x L [mm] | 100 x 120 x 10 |
| Sealing material | PTFE c / 1.4310 / NBR70 |
Product classification
Label List
Previous Page
TR02-P
Next Page
Free inquiry
