clean energy
We have many years of industry experience in the hydropower industry, especially in the hydropower sealing application engineering has rich experience and application knowledge, can provide the following support for the hydropower industry customers:
● Feasibility analysis of on-site engineering solutions
● Application Engineering
● Research and development of sealing materials for various hydropower industries
● Can provide standard cross-section sealing products and customized sealing
● Fast delivery, provide on-site installation guidance and technical support
● Seals with diameters up to 10 000mm are available thanks to its unique processing aids
The sealing material used by Ankai Power in the hydropower industry has good physical properties. Compared with traditional sealing materials, its excellent product performance is as follows:
Excellent wear resistance, especially suitable for water with large amount of sediment;
● Strong compressive deformation capacity;
More suitable for water medium, and no lubrication conditions;
The material elastic compensation ability is strong, suitable for large extrusion gap;
● Low requirements for the roughness of the sealing surface, which can reach R1.2um;
Combined with rich industry experience, we can provide users with the following product solutions:
● Guide vane seal
● Ball valve seal
● Sealing of water-conducting mechanism
● Oil receiver seal
● Blade seal
● Spindle rotary seal
● The relay seal
● Butterfly valve seal
● Ball valve rotary trunnion seal
● flange expansion joint seal
● Valve control system seal
● Seals for various valves
●...
TK11D blade seal
Multi-channel sealing lip design, double-acting, excellent static and dynamic sealing performance, wear resistance, suitable for pure water and sediment conditions.
TK13D blade seal
Special customized double lip seal design, double-acting, with rubber elastomer to provide pre-tightening force, good static and dynamic sealing performance, wear resistance, suitable for installation in wear grooves.
TK08S ball valve seal
Double lip seal design, double-acting, with O-ring elastomer to provide pre-tightening force, good static sealing and dynamic sealing performance, good anti-extrusion performance, suitable for large gaps and partial load conditions.
TK08D ball valve seal
Double-acting seal, with O-ring elastomer to provide pre-tightening force, good static sealing and dynamic sealing performance, better than the traditional tetrafluoroethylene seal wear resistance and low pressure sealing effect.
TK35P ball valve seal
Double-acting compact piston seal, the inner diameter of the seal adopts interference fit design, good stability in the groove, strong anti-distortion deformation ability, compact design structure, suitable for narrow grooves, often used as a substitute for O-rings.
TK08DSS ball valve seal
Double lip seal design, double acting, with special-shaped ring elastomer to provide pre-tightening force, good static sealing and dynamic sealing performance, good anti-extrusion performance, suitable for large clearance and partial load conditions.
TURS Barrel Valve Seal
Single lip seal design, flexible lip design, good stability in the groove, good resistance to permanent compression deformation and good static sealing performance.
TLRS Barrel Valve Seal
Single lip seal design, good stability in the groove, has good resistance to permanent compression deformation and good static sealing performance.
TS03P Guide Ville Seal
Single-acting seal, the outer diameter of the seal and the bottom diameter of the groove adopt interference fit, which can make the seal obtain better stability in the groove. The O-ring is embedded in the sealing groove to provide preload and make it reliable Low pressure sealing performance.
TS01P guide vane seal
Single-acting seal, the outer diameter of the seal and the bottom diameter of the groove adopt interference fit, which can make the seal obtain better stability in the groove and have good static sealing performance.
TFSS flange seal
Special customized structure design, single-acting, with special-shaped rubber elastomer to provide pre-tightening force, good sealing compensation performance, excellent axial and radial sealing effect, suitable for new groove design and old flange corrosion groove.
We Can Weld The Seal On Site According To The Needs Of Customers.
01
02
03
Free inquiry
