| Surface roughness | TPU/Elastomer | PTFE | ||
| Rtmax | Ra | Rtmax | Ra | |
| Sliding surface | ≤ 2.5 µm | 0.1–0.5 µm | ≤ 2 µm | 0.05 - 0.3µm |
| Trough bottom | ≤ 6.3 µm | ≤ 1.6 µm | ≤ 6.3 µm | ≤ 1.6 µm |
| Trough side | ≤ 15 µm | ≤ 3 µm | ≤ 15 µm | ≤ 3 µm |
| Bearing area: 50-95% and 0.5 Rz cutting depth (based on Cref = 0%) | ||||
| Recommended Size mm | ||||||
| Minimum nominal inner diameter d ≥ 4.5 mm. Profile dimensions, surface data and tolerances are the result of the interaction of the following factors: specific sealing material of the application, material combinations. Standard type: cutting gap 0. Cut 45°. |
| Operating parameters | ||
| Material | Temperature | |
| Sealing components | Minimum °C | Maximum °C |
 POM |
-50 | +100 |
 PTFE g |
-200 | +260 |
| PA |
-40 | +100 |
 PEEK |
-100 | +260 |
| Ordering example | |
| Introduction | Retaining ring TB11 |
| d x D x L [mm] | 100 x 120 x 13 |
| Sealing material | POM |
Product classification
Label List
Previous Page
TB12
Next Page
Free inquiry
