| Surface roughness | Rtmax | Ra |
| Sliding surface | ≤ 2.5 µm | 0.1–0.5 µm |
| Groove bottom | ≤ 6.3 µm | ≤ 1.6 µm |
| Groove side | ≤ 15 µm | ≤ 3 µm |
| Bearing area: 50-95% and 0.5 Rz cutting depth (based on Cref = 0%) | ||
| Recommended size mm | ||||||||
| d/f8 | D/H11 | D1/H11 | L/+0.2 | L1 | Rmax | R | H | |
| ＜ | ≥ | |||||||
| 5 | 100 | d + 8 | d + 6 | 4 | 1 | 0.4 | ≤ 0.4 | 7 |
| 100 | 150 | d + 12 | d + 9 | 5.5 | 1.5 | 0.4 | ≤ 0.4 | 10 |
| 150 | 600 | d + 15 | d + 11 | 6.5 | 2 | 0.4 | ≤ 0.4 | 13 |
| Operating parameters | |||
| Material | Temperature | Speed | |
| Sealing components | Minimum °C | Maximum °C | Maximum m/s |
 PU |
-30 | +110 | 4 |
 HPU |
-20 | ||
 SPU |
5 | ||
 TPU |
-50 | 4 | |
 XHPU |
-20 | ||
 XSPU |
-20 | 5 | |
 NBR |
-30 | +100 | 4 |
 FKM |
-20 | +200 | |
 EPDM |
-50 | +150 | |
 HNBR |
-25 | ||
| AFLAS |
-10 | +200 | |
| Ordering example | |
| Introduction | Dust seal TA04-B |
| d x D/D1x L/L1[mm] | 50 x 58 / 56 x 4/1 |
| Sealing material | PU |
Previous Page
TA05-A
Next Page
Free inquiry
