| Surface roughness | Rtmax | Ra |
| Sliding surface | ≤ 2.5 µm | 0.1–0.5 µm |
| Groove bottom | ≤ 6.3 µm | ≤ 1.6 µm |
| Groove side | ≤ 15 µm | ≤ 3 µm |
| Bearing area: 50-95% and 0.5 Rz cutting depth (based on Cref = 0%) | ||
| Recommended Size mm | |||||
| d/f8 | D/H8 | L/+0.2 | Rmax | H | |
| < | ≥ | ||||
| 22 | 100 | d + 10 | 7 | 0.4 | 10 |
| 100 | 200 | d + 15 | 9 | 0.4 | 12 |
| 200 | 600 | d + 20 | 12 | 0.4 | 16 |
| Operating parameters | ||||
| Material | Housing | Temperature | Speed | |
| Sealing components |
|
Minimum °C | Maximum °C | Maximum m/s |
 PU |
-30 | +80 | 4 | |
 HPU |
-20 | |||
 SPU |
5 | |||
 TPU |
-50 | 4 | ||
 XHPU |
-30 | |||
 XSPU |
-20 | 5 | ||
 NBR |
-30 | +200 | 4 | |
 FKM |
 PEEK |
-20 | +150 | |
 EPDM |
-50 | +80 | ||
 HNBR |
PEEK |
-25 | +150 | |
| AFLAS |
PEEK |
-10 | +200 | |
| Ordering example | |
| Introduction | Dust seal TA06 - A |
| d x D x L [mm] | 50 x 60 x 7 |
| Sealing material | PU / POM |
Previous Page
TA07-A
Next Page
Free inquiry
