| Surface roughness | Rtmax | Ra |
| Sliding surface | ≤ 2.5 µm | 0.1–0.5 µm |
| Groove bottom | ≤ 6.3 µm | ≤ 1.6 µm |
| Groove side | ≤ 15 µm | ≤ 3 µm |
| Bearing area: 50-95% and 0.5 Rz cutting depth (based on Cref = 0%) | ||
| Recommended Size mm | |||||
| d/f8 | D/H9 | D1/+0.1 | L/+0.2 | Rmax | |
| < | ≥ | ||||
| 5 | 50 | d + 10 | d + 9 | 2 | 0.4 |
| 50 | 150 | d + 15 | d + 14 | 2.5 | 0.4 |
| 150 | 600 | d + 20 | d + 18.5 | 3 | 0.4 |
| Operating parameters | |||
| Material | Temperature | Speed | |
| Sealing components | Minimum °C | Maximum °C | Maximum m/s |
 XHPU |
-30 | +110 | 4 |
 XSPU |
-20 | 5 | |
 POM |
-40 | +80 | 4 |
 PEEK |
-100 | +260 | 5 |
 UHMWPE |
-200 | +90 | 4 |
| Ordering example | |
| Introduction | Dust seal TA13 - A |
| d x D/D1 x L [mm] | 60 x 75/74 x 2.5 |
| Sealing material | POM |
Previous Page
TA12-B
Next Page
Free inquiry
