| Sealing material | TPU | PTFE | ||
| Surface roughness | Rtmax | Ra | Rtmax | Ra |
| Sliding surface | ≤ 2.5 µm | 0.1–0.5 µm | ≤2 µm | 0.05–0.3 µm |
| Trough bottom | ≤ 6.3 µm | ≤ 1.6 µm | ≤6.3 µm | ≤ 1.6 µm |
| Trough side | ≤ 15 µm | ≤ 3 µm | ≤15 µm | ≤ 3 µm |
| Bearing area: 50-95% and 0.5 Rz cutting depth (based on Cref = 0%) | ||||
| Recommended size mm | ||||||
| d/f8 | D/H10 | D1/H8 | D2 | L/+0.2 | L1/+0.2 | |
| ＞ | ≤ | |||||
| 5 | 36 | d + 6 | d + 2.8 | d + 0.35 | 8.5 | 3 |
| 36 | 60 | d + 7.5 | d + 3.2 | d + 0.4 | 10.5 | 3.5 |
| 60 | 90 | d + 9 | d + 3.5 | d + 0.5 | 15 | 5 |
| 90 | 150 | d + 9 | d + 3.5 | d + 0.6 | 15 | 5 |
| 150 | 200 | d + 16 | d + 7.1 | d + 0.7 | 20.3 | 8 |
| 200 | d + 17 | d + 7.5 | d + 0.8 | 25 | 8 | |
| *The value of the cutting clearance depends on the material and temperature. For details, please refer to the profile description. |
||||||
| Operating parameters | |||||
| Material | Temperature | Speed | Specific load | ||
| Guide components | Minimum °C | Maximum °C | Maximum m/s | Maximum N/mm2 | |
 PTFE g |
-200 | +200 | 4 | 3.0 | |
 PTFE b |
5 | 4.5 | |||
 POM |
-50 | +100 | 4 | 25 | |
| PA |
-40 |
||||
 Presin |
+130 | 90 | |||
| Ordering example | |
| Introduction | Guide ring TF06 |
| d x D/D1x L/L1[mm] | 100 x 109/103.5 x 15/5 |
| Material | POM |
Previous Page
TF07
Next Page
Free inquiry
