| Surface roughness | Rtmax | Ra | Rtmax | Ra |
| Sliding surface | 12,5 | 3,2 | 6,3 | 1,6 |
| Trough bottom | 12,5 | 3,2 | 6,3 | 1,6 |
| Trough side | 12,5 | 3,2 | 6,3 | 1,6 |
| Bearing area: 50-95% and 0.5 Rz cutting depth (based on Cref = 0%) | ||||
| Recommended Size mm | ||||||||||
| Due to the diversity of this profile design, listing standards and sizes must consider the magnitude and location of tolerances and be adjusted according to special functions. |
| Operating parameters | ||
| Material | Temperature | |
| Sealing components | Minimum °C | Maximum °C |
 PU |
-30 | +110 |
 HPU |
-20 | |
 SPU |
||
 TPU |
-50 | |
 XPU |
-30 | |
 XSPU |
-20 | |
 NBR |
-30 | +100 |
 FKM |
-20 | +200 |
 EPDM |
-50 | +150 |
 HNBR |
-25 | |
 MVQ |
-60 | +200 |
 POM |
-50 | +100 |
 PA |
-40 | |
 UHMWPE |
-200 | +90 |
 PEEK |
-100 | +260 |
 PTFE v |
-200 | |
 PTFE g |
||
 PTFE b |
||
 PTFE c |
||
 Presin |
-40 | +120 |
| Ordering example | |
| Introduction | Static Seal TR14 |
| d x D x H [mm] | 85 x 100 x 3.5 |
| Sealing material | POM |
Product classification
Label List
Previous Page
TR15-P
Next Page
Free inquiry
