| SC_TC Product Features | |
| Oil seal outer edge: Rubber elastomer, with good static sealing performance; Oil seals with dust lip are available; A spring is installed at the sealing lip; Can be installed in a split groove; |
|
| SC_TC Product Advantages | |
| Widely used in various fields of general industry; such as pumps, motors, reducers, machine tools, etc.; Reliable sealing of the oil seal outer edge, even if the surface roughness of the seat hole is large, or there is thermal expansion, good sealing performance can be ensured; |
| Application Conditions |
|||||
| Medium | Mineral oils | Water | Lubricating greases | Pressure Mpa | Rotating speed m/s |
| NBR | -30℃ ~ +100℃ | +5℃ ~ +100℃ | -30℃ ~ +100℃ | 0.05 | 20 |
| MVQ | Not applicable | -50℃ ~ +180℃ | Not applicable | 25 | |
| FKM | -10℃ ~ +180℃ | +5℃ ~ +100℃ | -10℃ ~ +180℃ | 25 | |
| Surface Machining Accuracy | ||
| Surface Roughness | Contact shaft surface | Cavity |
| Ra | ≤0.4 μm | ≤10.0μm |
| Rmax | ≤2.5 μm | ≤25.0 μm |
| The sealing surface should be polished to remove the guide helix on the shaft surface. It is best to use grinding or only local grinding and polishing on the sealing surface to avoid leakage caused by the helix generated by machining. Surface hardness 45-60HRC. |
||
SC_TC Oil Seal Specification
Product classification
Label List
Previous Page
SB/TB
Next Page
Free inquiry
